Retractable spray booth manufacturer: retractable mobile spray booth equipment and related usage issues
Published Time:
2020-07-16
I. What is the impact of differences in airflow direction when using a telescopic mobile spray booth? Because this equipment is specifically used for spraying and baking, in the automotive, machinery, hardware, furniture, chemical and other industries, for surface coating and baking of workpieces, in this case, the corresponding telescopic spray booth manufacturer will naturally change according to the processing requirements.
I. Usage Retractable mobile spray booth What is the impact of differences in airflow direction when using the equipment?
Since this equipment is specifically used for painting and baking, in the automotive, machinery, hardware, furniture, chemical and other industries, the surface coating and baking of workpieces, in this case, the corresponding Retractable spray booth manufacturer will change naturally according to processing requirements.
So far, there are various different directions of air inside the equipment. In this equipment, the airflow flows from one end of the room to the other. However, the whole equipment is simple and very convenient, but the mist can move along the outer surface of the car body, and the mist can stay away from the operator.
Used on the surrounding surface Retractable mobile spray booth In this case, air enters the room through the filter device on the ceiling and is discharged from the surrounding walls of the room. Because the mist is far away from the car body and can be cleared around the driver, the painting effect and working environment are still possible.
More advanced technology from retractable spray booth manufacturers is a complete set of spray booth equipment. Air enters from the ceiling and is discharged through a pit or basement, providing a cleaner spraying process and a safer working environment. However, this type of mobile retractable spray booth equipment is expensive, takes up a lot of space, and is usually used in harsh working environments.
II. Do you need to pay attention to the lighting of the spray booth?
1. Brightness: The brightness of the retractable mobile spray booth should reach 800~1000 lux, and light close to the D65 light source should be used, and the inner wall should be matte white.
2. Airflow speed is 0.2-0.3m/s;
3. When the filtration effect is: the upper part of the room is exposed to sunlight, there should be less than 5 pieces of fine dust per square meter;
4. Wall sealing effect: The mobile retractable spray booth must be sealed;
5. Ensure positive pressure: The air intake is slightly larger than the exhaust volume;
6. Heating system: The sealing effect of the burner and chimney should be good, and oil ash is not allowed to be burned.
7. Heating speed: It takes about 10~15 minutes to move the mobile retractable spray booth from 20 to 60.
8. Retractable spray booth manufacturer When processing and producing this equipment, not only artificial light sources but also natural light sources are needed. If there is a natural light source, the natural light source should be the main light source, but sunlight should not directly shine on the paint surface. This will have a greater impact on the painting effect. We can avoid sunlight directly passing through the baffle to soften the light, but this will not affect the overall lighting.
Keywords:
Retractable mobile spray booth, retractable spray booth manufacturer, retractable spray booth manufacturer
Recommended News
Tiansheng Environmental Protection Equipment
Contact Person: Manager Liu
Tel: +86-18663781444
WhatsApp: +86-18660773816
Address: Diaozhen Industrial Park, Zhangqiu District, Jinan City
Copyright © 2023 Jinan Tiansheng Environmental Protection Equipment Co., Ltd.